|
more details |
| LOBDELL NOS 36-Hole Wood Rims-28 inch, painted with two stripes |
|---|
| AVAILABLE TO SELL! Rims for 28 inch glue-on tires, enameled with pin stripes NOS; these have never been laced into wheels, they are waiting for the perfect project bike. There are 7 of them with 36-holes. The Lobdell brand is printed on each rim. The O.D. is 25 inches, the width is 1.065 inches. There are also four (4) additional 36-hole rims that are a little wider, they are 1.286 inches wide. All 11 rims were painted and striped by Lobdell and have the LOBDELL brand name printed on the rim. [Item# Rim-015.L] |
| | |
more details |
| WOOD RIM 28-inch for Clincher Tire and Tube |
|---|
| This is a 28 inch 36-hole wood rim for clincher tire & tube (wire-on type). The O.D. is 25.5 inches, the width is 1.875 inches. I think that the current 700x35c and 700x38c tires & tubes will fit this rim and are still available at about $30.00/set (one tire & one tube). The color of the rim is: dark blue center, black outer with four gold stripes. There are several scratches to the finish and it appears that there are some tiny ivory color dots on some portions of the finish which could have been caused by the over-spray of painting nearby. There is a metal sleeve at the valve hole which is riveted into the wood; the stamping on the metal is TUCKER RIM, SIDNEY OHIO. There is also a stamp on the rim which appears to be the makers logo; it is the likeness of a rim with the words TUCKER RIM, SIDNEY OHIO. It appears that this rim might have been laced into a wheel as there are some very slight scratches near three of the spoke holes. It is incredibly straight for an old rim. [Item# Rim-020.T] | |
| | |
more details |
| c.1943 Persons Saddle Undercarriage (Available during WWII) |
|---|
| AVAILABLE FOR SALE, I HAVE DUPLICATES! I have a wood crate of 16 of these Persons Saddle Undercarriages. During the WWII some bicycle parts were very difficult (or impossible) to obtain. My parents told me stories about receiving bicycles from distributors and/or factories without chains, pedals, seats, tires, etc. There would be a note in the box with the bike explaining the shortage due to the war effort. Because of the shortage of bikes, retailers never made any complaints about the missing components (they were thrilled to obtain any bikes). This is the genuine Persons seat undercarriage for the large pan seats. To completely restore an `original` seat you simply add the pan (plate) and clamp assembly together with the foam pad and fabric upholstery. The overall length of the undercarriage is 10 inches. The distance between the two springs is 6 1/8 inches (measured center to center). The distance, outside of one spring to outside of the other spring, is 7 3/4 inches. [Item# Seat-011.P] | |
| | |
more details |
| c.1943 Persons Clamp Assembly for Saddle Undercarriage (Available during WWII) |
|---|
| AVAILABLE FOR SALE, I HAVE DUPLICATES! This is the original NOS Clamp Assembly for the Persons WW-2 seat undercarriage. The dimension of the rail on the undercarriage is 1 1/8 inch which is different from the citizen model seats which were 1-inch. This clamp assembly is for the 1 1/8 inch rail. The diameter of the seatpost opening is for a 5/8` OD seatpost. [Item# Seat-012.P] | |
| | |
more details |
| Reproduction of the Seat from the Late 1800`s and early 1900`s |
|---|
| This is a reproduction of the type of seats that were used in the late 1800`s and early 1900`s. The top is genuine leather, the undercarriage is chrome plated steel with 2-springs in the rear & 1-spring in the nose. It was produced in the 1970`s. [Item# Seat-035.R] | |
| | |
more details |
| Pair of Wheels, Steel Clad Wood Rims |
|---|
| A pair of 28 inch steel clad wood wheels. The REAR: is a Morrow coaster brake with a 9T 1-inch pitch sprocket. There are 3 spokes missing (broken), the rim is almost perfectly straight; it is 1.40 inches wide, it has been painted black and the paint is chipping. The FRONT: has a ball bearing hub that rolls perfectly, the rim is almost perfectly true; the width is 1.35 inches, it has been painted silver oxide and there is some chipping of the paint. The O.D. is 25 inches. This pair of wheels have been packed in a carton since the late 1980`s. I cleaned some of the old grease off the hubs for the photos but I left plenty of grease & grime for the next owner. See the picture gallery for additional pictures of the rear and front wheels. These wheels are no longer in my collection. [Item# Wheel-015.G] | |
| | |
more details |
| Rear 28 inch Wheel, Steel Clad Wood Rims and New Departure D Coaster Brake |
|---|
| AVAILABLE TO SELL! This is a 28-inch rear wheel built with a steel clad wood rim and New Departure model-D coaster brake. The rim is reasonably true (almost perfect), it is 1.35 inches wide. The steel jacket needs a good cleaning as does the hub. I cleaned some of the grease/dirt off of the hub for the pictures but I left plenty for the next owner. There are no broken spokes. See the picture gallery for more views. [Item# Wheel-017.A] | |
| | |
more details |
| Rear 28 inch Wheel, Steel Clad Wood Rim and New Departure D Coaster Brake |
|---|
| AVAILABLE TO SELL! This is a 28-inch rear wheel built with a steel clad wood rim and New Departure model-D coaster brake. The rim is reasonably true (almost perfect), it is 1.40 inches wide. The steel jacket needs a good cleaning as does the hub. I cleaned some of the grease/dirt off of the hub for the pictures but I left plenty for the next owner. There are no broken spokes. See the picture gallery for more views. [Item# Wheel-017.C] | |
| | |
|
| New Search |
ProteanPAPER Business Software
|
